 |
ติดต่อพนักงานขาย โทร: 0-868-1395, 0-2868-1127-9 แฟกซ์: 0-2458-1257 |
|
|
|
รหัสใบสินค้า : |
548 จำนวนผู้ชม ( 2213 ) คน |
|
|
ไขควงไฟฟ้า เดลโว่ delvo รุ่น dlv04c/10c C Series (Current Control Type)
ไขควงเดลโว่, DELVO, DLV04C, DLV04C/10C, DLW9220, DLW9240, DLW9250, DLT1173A, DLW4540, DLW4550, DLV10C10L-AL SOLF fastening, DLW4560, DLP6640, DLP6650, DLP6600, DLP6610, DLW9015, DLV04C/10C, DCC0101X
|
| |
|
|
|
| |
 |
 |
 |
 |
 |
 |
 |
| คำค้นหา: |
ไขควงเดลโว่, delvo, dlv04c, dlv04c/10c, dlw9220, dlw9240, dlw9250, dlt1173a, dlw4540, dlw4550, dlv10c10l-al solf fastening, dlw4560, dlp6640, dlp6650, dlp6600, dlp6610, dlw9015, dlv04c/10c, dcc0101x, เดลโว่, delvo, เดลโว่, ไขควงเดลโว่, delvo, dlv04c, dlv04c/10c, dlw9220, dlw9240, dlw9250, dlt1173a, dlw4540, dlw4550, dlv10c10l-al solf fastening, dlw4560, dlp6640, dlp6650, dlp6600, dlp6610, dlw9015, dlv04c/10c, dcc0101x,Low Voltage (DC) Brush motor Brushless motor Miniature Precision Machine screw screw screw 1.2 - 4.0 mm Lever Start Low Voltage Brushless Motor Grounded Bit ESD Protection Variable Speed DO 10 delvo Brushless Type C Series (Current control Type) Model DLV04C/10C CE (NEW) DLVO10C10L Features DLVO4C10L DCC0101X-AZ ESCR • Easy fastening setting by controller Current Controlled Torque System suitable for screw fastening work • Low-voltage brushless motor • ESD (electrostatic discharge) protection structure • For both hand-held / automatic machines • Controller has built in counting function. Prevents human errors Ο NITO KOHKI delvo * When the same bit is used. Four screwdrivers can be consolidated into one All in • Controller can be set to any torque and speed within range. one! * The range varies depending on SOFT fastening or HARD fastening 0.25 Nm 453 min ist uni GUID 0.15 Nm 800 min C 2nd unit Torque: 0.05 -0.4 Nm (DLV04C) 10.44 -3.54 lbf-in] 0.2 - 1.0 Nm (DLV10C) (1.77 - 8.85 lbf-in] Speed: 100 - 1000 min . 0.35 Nm (CGI min BIELA 3rd unit SI delvo 0.30 Nm 450min 4th unit Torque range 0.05 - 1.0 Nm • Easily adapts for use in automatic machines The sequencing of the screwdrivers can be controlled by a PLC. • Built-in Screw Fastening Counter Function Controller has built in counting function. Prevents human errors. NITO KOHKI DLP6650 180 For installation on automatic assembly machines, attach optional flange coupling (DLW9015) or vacuum pickup (DLP6650). delvo Specifications Electric Screwdriver Model Bit CE/UL DLV04C10L-AY K DLV10C10L-AYK PSEDLV04C10L-AZ M DLV10C10L-AZM Power Source DCC0101X-AZP or DCC0101X-AZN Torque Adjustment Stepless Torque SOFT fastening setting (1000 min-' setting) 0.05 -0.4 [0.4 - 3.5] 0.2 - 1.0 [1.8 - 8.9) SOFT fastening setting (600 min setting) 0.05 -0.35 (0.4 - 3.1) 0.2 -0.45(1.8 - 4.0] (Nm [bf-in) HARD fastening setting 0.05 -0.4 [0.4 -3.51 0.2 - 1.0 (1.8 - 8.9) Free Speed SOFT fastening setting 600 - 1000 (min) HARD fastening setting 100 - 1000 Screw Size Machine screw 1.2-3.0 1.8 - 4.0 (mm) Tapping screw 1.1 - 2.5 1.6 - 3.5 Bit Type NK35 (OD6.35 mm (1/4") Hex. Shank) Input Voltage LZ BR 24 V DC Mass 370 g (0.82 lbs) Rated Operation ON: 0.5 seconds / OFF: 3.5 seconds Please contact us for 4 mm bit type ("M” Bit) of CE/UL models. Model DCC0101X-AZ P* I Input Voltage AC100-240 V AC, 50/60Hz Operation Channel Torque and speed setting in 4-channel memory Function Can switch to any operation channel Count Function Tracks screws fastened Workpiece detector can be incorporated External Start up Start up control can be enabled by external input signal Control Function Input Signal Method Photocoupler input (24 V DC drive (5 mA/1 input), respond to PNP output) Output Signal Photocoupler output Method (30 V DC or less, 30 mA/1 output or less, PNP output method) Service Power Source 24 V DC (Maximum capacity 200 mA) Power consumption When on standby: 20 W During electric screwdriver rotation (rated): 30 W Mass 1100 g (2.4 lbs] Power cord (Optional)* DLW9220 / DLW9240 / DLW9250 *DCC0101X-AZN with NPN output also available *The power cord is sold separately. Ask us for the required power cord when ordering. (see page 9 "Optional Accessories") Controller delvo Brushless Type
Comparison of Adjustment Method with Conventional Model
NITTO KOHKI
Torque adjustment
Torque is adjusted by turning the adjustment ring at the end of the screwdriver.
Can be set with the external controller. No need to adjust the screwdriver body
delvo
Conventional
C Series
О
тто конкі
o
Speed setting
The speed of transformerless type screwdrivers is fixed for each series.
Can be set with the external controller. Adjustable between 100 to 1000 min-1
e
delvo
SOFT / HARD Fastening Settings Two types of fastening mode available subject to the workpiece. Coordinate the actual workpieces, screws and operating conditions and determine the fastening mode.
SOFT fastening setting Suitable for workpieces with high fastening load such as tapping screws or fastening soft objects such as rubber.
HARD fastening setting
Suitable for workpieces with small fastening load such as threaded holes or rigid bodies such as metal.
HARD fastening setting
DLVO4C (Nm)
DLV10C
(lbf-in)
(Nm)
(lbf-in) 8.85
3.98
8.85
1.0
3.54
7.08
Output Torque and Rotation Speed SOFT fastening setting DLV04C
DLV10C (Nm) (lbf-in) (Nm)
(lbf-in) 0.45 Setting torque 100%
Setting torque 100% 0.40 3.54
7.97 0.35
Setting torque 50% 0.30
Setting torque 50% Setting torque 30% 2.21 0.6
4.43 0.15
1.33
Setting torque 30% 3.54 0.10
Setting torque 1% 0.05
Setting torque 1% 0.2 0.44
1.77 600 700 800 900 1000
600 700 800 900 1000 Speed setting (min-')
Torque
Torque
5.31
Torque
Torque
R 0.20
0.89
0.3
2.66
0.2
0.05 -
1
0.44
1.77 50 100
50
100 Setting torque (%) *The graph is for guidance only. The output torque range is not guaranteed.
1/0
Service power source
Input
External Signals You can input or output external signals via a signal terminal block. Terminal No. Function
Details 1 (+) +24 V DC
Built-in service power source (Capacity: Maximum 200 mA) 2 (-) O V DC
• Use in power source for input/output signal common wire, or for the workpiece detection sensor, etc. Channel A
In the 2-bit input signal, specify the operation channel (CH1 to CH4) Channel B
• Valid only when "operation channel switching method" (No.1 CH-CHG) is set to "INPUT" Forward rotation startup
Startup with external input signal Reverse rotation startup
Input the workpiece signal (workpiece detection sensor output) WORK
• With "count function" (No.11 COUNT-FNC) and "workpiece signal" (No.12 WORK-SNSR)
set to ON, the workpiece signal input is valid WORK RESET
Reset operation (same as controller [WORK RESET] button
Lock the controller button operation Keylock
• Disable the controller button operation, and prevent setting changes by the operator
Connect O V DC* Input signal negative common wire
• Service power source (terminal No.2) or external O V DC power source can be connected Forward rotation signal
Set output signal during forward rotation to ON 12 Reverse rotation signal
Set output signal during reverse rotation to ON 13 Count-up (C-UP)
Performance of normal screw tightening (torque-up) sets output signal to 0.3 seconds ON 14 Screw fastening NG (F-NG)
If screw fastening NG, sets output signal to 0.3 seconds ON Operation channel 1 (CH1) 16 Operation channel 2 (CH2)
Set the channel output signal to ON during operation or settings Operation channel 3 (CH3) 18
Operation channel 4 (CH4) 19 Operation OK
If the set count screw tightening is judged to be completed and operation OK, the output signal is set to ON Operation NG
When the WORK input signal is OFF during an operation, and the operation is judged to be NG, the output signal is ON 21 Space
Connection impossible
Connect +24 V DC* Output signal positive common wire
Service power source (terminal No.1) or external +24 V DC can be connected
15
17
Output
20
22
*When PNP output
delvo Brushless Type
Optional Accessories
Grounded 3-Prong Power Cord
Screw vacuum pump DLP2530 (100 V), DLP2570 (230 V)
DLW9220
DLW9240
DLW9250
NITI Oelvo
SMONUMUNE
Connect the tube to the vacuum pickup port. The vacuum will pick up the screw.
North America
Europe
UK
Torque checker DLT1173A
Screw joint (with white rubber) DLW4540
Screw joint (with black rubber) DLW4550
Screw joint (with metal washer) DLW4560
DLW454064
DLW4550
ULW45608
*For DLV04C10L-AY SOFT fastening torque measurement
*For DLV10C10L-AY SOFT fastening torque measurement
*For HARD fastening torque measurement of both DLV04/10C10L-AY
For “K” Bit
For “M” Bit
Vacuum pickup DLP6640
Vacuum pickup (for automatic machine) DLP6650
Vacuum pickup DLP6600
Vacuum pickup (for automatic machine) DLP6610
Flanged coupling (for automatic machine) DLW9015
* Please see page 39 for details.
External Dimensions
•DLV04C/10C
(53 (2.09"])
230 (9.06")
8.5 (0.33")
35 (1.38")
$33[1.30")
dia.
O 000
0000000 O'O 00000 000000 OOOOOO
OOOO OOOO
OOOO
OOOO 0000
0000
OOOO
0000
0000
000 O 0000 0000
40 (1.57"] dia
.DCC0101X
(13 [0.51"))
120 (4.72")
77 (3.03")
(11 [0.43"])
OUTPUT
INPUT DC24V 22 21 20 19 18 17 16 15 14 13 12 11 109 8 7 6 5 4 3 5+ மாலைமறைமலைமாலைமறைவு
POWER
58 [2.28"]
NITID KOHKI
ENGOK/NG
DRIVER
-COUNT
CH
170 (6.69")
(4 (0.16"])
SETTING
delvo
unit: mm (inch)
, ตัวแทนนําเข้า บริษัท เอ็ม.พี.ที ซัพพลาย จํากัด Ins : 02-8681399, 02-8681129 ID LINE : mpt.monchai, |
|
|
|
|
|
| ติดต่อพนักงานขาย โทร: 0-868-1395, 0-2868-1127-9 แฟกซ์: 0-2458-1257 |
| |
|
